Dual-Axis Radiographic Hydrodynamic Test Facility

Stored: Dual-Axis Radiographic Hydrodynamic Test Facility

Dual-Axis Radiographic Hydrodynamic Test Facility Type: Research and Development Agency Parent organization: Los Alamos National Laboratory Top organization: Department of Energy Employees: 150 Executive: Facility Director Budget: Not publicly specified (Funded through the National Nuclear Security Administration's budget) Address: TA-15, Area III, Los Alamos National Laboratory, Los Alamos, NM 87545 Website: https://www.lanl.gov/science-innovation/nuclear-weapons/darht/index.php Creation Legislation: No specific legislation; part of broader DOE/NNSA directives Wikipedia: Dual-Axis Radiographic Hydrodynamic Test Facility

Dual-Axis Radiographic Hydrodynamic Test Facility [{"name":"Dual-Axis Radiographic Hydrodynamic Test Facility","title":"\u003Ca class=\"mw-selflink selflink\"\u003EDual-Axis Radiographic Hydrodynamic Test Facility\u003C\/a\u003E","lat":35.879049,"lon":-106.300485,"otherValues":{"HeadquartersAddress":"TA-15, Area III, Los Alamos National Laboratory, Los Alamos, NM 87545"}}] +− Leaflet | © OpenStreetMap contributors This map created from a Cargo query ()

Mission The Dual-Axis Radiographic Hydrodynamic Test Facility (DARHT) is dedicated to enhancing the safety, reliability, and effectiveness of nuclear weapons through advanced radiographic testing without the need for full-scale nuclear detonations. It provides critical data for the U.S. nuclear stockpile stewardship by simulating weapon implosions using non-nuclear methods.

Services Radiographic testing; Hydrodynamic experiments; Stockpile stewardship

Regulations

The Dual-Axis Radiographic Hydrodynamic Test Facility (DARHT) is a facility at Los Alamos National Laboratory which is part of the Department of Energy's stockpile stewardship program. It uses two large X-ray machines to record three-dimensional interior images of materials. In most experiments, materials undergo hydrodynamic shock to simulate the implosion process in nuclear bombs and/or the effects of severe hydrodynamic stress.

The tests are described as "full-scale mockups of the events that trigger the nuclear detonation". The powerful pulsed X-ray beams allow for an ultra-fast motion picture to be constructed showing the details of the process being studied in three dimensions. The tests are compared with computer simulations to help improve the accuracy of the computer codes. Such testing falls under the category of sub-critical testing.

Official Site

Mission

DARHT's mission involves ensuring the safety, security, and reliability of the U.S. nuclear weapons stockpile through non-explosive testing. By using dual-axis radiography, DARHT captures detailed, high-speed images of materials as they undergo hydrodynamic motion, simulating nuclear weapon implosions to validate the performance of weapon designs and materials."Dual-Axis Radiographic Hydrodynamic Test Facility". Los Alamos National Laboratory. https://www.lanl.gov/science-innovation/nuclear-weapons/darht/index.php. 

Parent organization

DARHT is operated by the Los Alamos National Laboratory, which is managed by Triad National Security, LLC for the U.S. Department of Energy's National Nuclear Security Administration (NNSA). This places DARHT under the top organization of the U.S. Department of Energy, focusing on nuclear security and stockpile stewardship."History & Key Events". Los Alamos National Laboratory. https://www.lanl.gov/about/history-key-events.php. 

Legislation

While DARHT does not have specific legislation for its creation, it operates under the broader mandates of the Department of Energy and NNSA, particularly those related to the Stockpile Stewardship Program initiated after the Comprehensive Nuclear-Test-Ban Treaty."Stockpile Stewardship Program". U.S. Department of Energy. https://www.energy.gov/nnsa/articles/stockpile-stewardship-program. 

Partners

• Los Alamos National Laboratory
• National Nuclear Security Administration
• Various U.S. Department of Energy research entities for collaborative efforts in nuclear weapon science.

Number of employees

DARHT employs approximately 150 staff members, including scientists, engineers, and support personnel."DARHT Team". Los Alamos National Laboratory. https://www.lanl.gov/science-innovation/nuclear-weapons/darht/team.php. 

Organization structure

The facility is structured around:

• Research and Experimentation Division, which conducts the hydrodynamic experiments.
• Accelerator Operations Division, responsible for maintaining and operating the electron accelerators.
• Diagnostics and Analysis Division, which interprets the radiographic data.

Leader

The facility is led by a Facility Director.

Divisions

• Experimentation Division for designing and executing tests.
• Accelerator Operations for managing the dual electron accelerators.
• Diagnostics for data analysis and image processing.

List of programs

• Hydrodynamic Testing Program
• Radiographic Imaging Program
• Stockpile Stewardship Experiments

Last total enacted budget

The budget for DARHT is integrated into the larger NNSA budget for stockpile stewardship, with specific allocations not publicly detailed but part of a multi-billion-dollar program."Budget". U.S. Department of Energy. https://www.energy.gov/nnsa/budget. 

Staff

The staff at DARHT consists primarily of scientists, engineers, and technicians dedicated to the operation of the facility and the conduct of experiments.

Funding

Funding for DARHT comes through the U.S. Department of Energy's National Nuclear Security Administration as part of the Stockpile Stewardship Program, with funds allocated for maintaining and upgrading the facility.

Services provided

DARHT provides high-resolution radiographic images of materials under extreme conditions, simulating nuclear weapon implosions. This allows for the study of material behavior, validation of computer models, and enhancement of weapon safety and reliability without nuclear testing."DARHT Mission". Los Alamos National Laboratory. https://www.lanl.gov/science-innovation/nuclear-weapons/darht/mission.php. 

Regulations overseen

As part of the DOE and NNSA, DARHT adheres to various nuclear safety, security, and environmental regulations but does not itself oversee regulations.

Headquarters address

TA-15, Area III, Los Alamos National Laboratory, Los Alamos, NM 87545

History

DARHT was conceived in the late 1980s to replace older radiographic facilities at LANL, with construction beginning in the 1990s. It became operational in stages, with the first axis completed in 1999 and the second in 2003, significantly enhancing the U.S. capability to maintain its nuclear arsenal without explosive testing."DARHT History". Los Alamos National Laboratory. https://www.lanl.gov/science-innovation/nuclear-weapons/darht/history.php. 

History

Planning for DARHT began in the early 1980s. Based upon the success of Livermore's Flash X-Ray (FXR), induction-linac facility, in 1987 Los Alamos chose the same type of accelerator to replace PHERMEX, an radiofrequency (RF) accelerator commissioned in 1963.

The project became an important priority after the United States stopped testing nuclear weapons in 1992. Approval for an overhaul and new axis came in stages, with the first axis approved for construction in 1992 and the second axis (initially to be a twin of the first) in 1997. This plan was changed when the Department of Energy decided it wanted the second axis to deliver not one view of the implosion, but a series of views in rapid succession.

Construction was halted between 1995 and 1996 due to lawsuits by Los Alamos Study Group and Concerned Citizens for Nuclear Safety, two anti-nuclear weapons organizations demanding that the laboratory produce an Environmental Impact Statement for its construction and operation. Activists argued that DARHT is in violation of the Comprehensive Test Ban Treaty and potentially the Nuclear Non-Proliferation Treaty, though the lab and the DOE reject this view.

When completed in 1999, the first-axis accelerator produced a 60ns electron pulse with a current of 2 kA and an energy of 20 MeV focused to 1mm diameter spot on the target - the smallest spot size and shortest pulse length ever achieved at that intensity. As a result, image quality was about three times higher than at Livermore's FXR facility.

The second machine (second axis) is more complicated and, when first completed in 2003, was found to be unusable due to electrical breakdown. The origin of the electrical breakdown turned out to be unexpectedly high electric fields between the high-voltage plate and the oil-insulated magnetic cores and at sites where metal, high-voltage insulator, and vacuum meet inside the cells. After much analysis, the design error was tracked to faulty equipment used when doing voltage calibrations.

An extensive design overhaul and rebuild was required, which was completed in 2008. The project was initially expected to cost $30 million in 1988, but costs ultimately rose to $350 million by 2008 when the facility became completely operational.

Description

File:Linear electron schematic.jpg

Linear induction accelerator schematic

File:DAHRTCell Refurbed.jpg

The 2nd, refurbished accelerator

During a weapon's crucial triggering phase, explosive charges that surround the nuclear fuel are detonated at multiple points. The result is a shock wave that moves inward (implosion) at supersonic speeds, compressing the fuel to higher and higher density. Implosion ends when the fuel reaches a supercritical density, the density at which nuclear reactions in the fuel build up an uncontainable amount of energy, which is then released in a massive explosion. To make the mockup non-nuclear, a heavy metal surrogate (such as depleted uranium or lead) stands in for the nuclear fuel, but all other components can be exact replicas. Sub-critical masses of plutonium may also be used.

Under such extreme implosion forces materials tend to behave like fluids, so this mock implosion is called a hydrodynamic test, or hydrotest. Standard practice is to take a single stop-action snapshot of the weapon mockup's interior as the molten components rush inward at thousands of meters per second.

X-rays that can penetrate the heavy metal in a weapon mockup are made with an electron accelerator. An electron beam moving at near the speed of light is smashed into a tungsten target. The electrons are yanked off course by the strong electrostatic pull of the positively charged nuclei in the tungsten atoms, and their sudden change in direction causes them to give off energy in the form of high-energy x-rays in a process called bremsstrahlung.

Scientists already knew how to use a short burst (pulse) of high-energy electrons (rather than a continuous beam) to make a short pulse of high-energy x-rays recorded on conventional x-Ray films. The new challenge was for the accelerator to deliver a very large number of electrons in an extremely powerful pulse to generate an x-ray flash that can penetrate the mockup during the ultra-dense implosion. Specifications call for a pulse width of 60 billionths of a second.

Each electron accelerator consists of a long row of doughnut-shaped magnetic induction cells, each connected to a high-voltage generator. There are 74 in total in each accelerator but not all may be used. At the instant of firing, each generator discharges its power, creating a pulse of electric current through its induction cell, which in turn creates a large voltage difference across the gap separating that cell from its neighbor. The electron beam-pulse travels through the central bore of the cells, receiving a 200 keV energy kick each time it passes through a gap.

One of the problems was designing the new induction cores to fit in the confines of the previous facility. The design team had to replace the ferrite used in the first axis cores with "metglas"—paper-thin ribbons of amorphous iron tape. The maximum magnetic field strength (saturation point) in metglas is five times higher than in ferrite. The magnetic tape was insulated by thin layers of mylar and wound up into a roll of 20,000 turns to make mammoth six-foot-diameter cores, each four inches wide and weighing more than one and a half tons. Four cores fit into each induction cell.

Perhaps the most significant technical advance achieved at the DARHT facility are the high-speed cameras used to image x-rays on the second axis. These cameras utilizes the world's largest LSO crystal array to convert the x-rays into visible light which are then imaged with the world's highest speed CCDs (developed jointly by MIT and Los Alamos) at more than two million frames per second. These scintillation cameras are further augmented by a large anti-scatter (“Bucky”) grid to improve image contrast. The unique combination of diagnostics solves technical surveillance problems that have persisted since the Manhattan Project enabling the United States to assert higher confidence in its nuclear stockpile performance and safety margins without the need for nuclear testing.

External links

• Official Website
• wikipedia:Dual-Axis Radiographic Hydrodynamic Test Facility
• Stockpile Stewardship Program