Template:Location map

Template documentation[view] [edit] [history] [purge]

Location map

class=notpageimage|

Location of Yellowstone in the north-western United States of America

The location map template generates a location map as a composite image, consisting of a map and a location mark. Optionally, a label and caption can be added.

Usage

Map image files are not accessed directly, but by using an auxiliary map definition. For example, if the first unnamed parameter supplied to this template is Japan, then this template uses the entry for Japan in Module:Location map/data/Japan if it exists, which contains the data needed to generate the composite image.

Please note

• Assigning any value to the parameter |caption= causes the map to be displayed as a thumbnail image. If this parameter is not declared, the template will generate a default caption.
• The coordinates are not checked. If the coordinates specified fall outside the area covered by the map image, the location mark will not display inside the image; however, it may be displayed somewhere else on the page.
• Do not use px when setting the map image size. Using |width=200px will usually cause a very large map to be displayed. Use |width=200.
• To create a map with more than one location mark, use either {{Location map+}} or {{Location map many}}.

Blank templates

Blank templates

Decimal degrees	Degrees, minutes, seconds	With {{Coord}} (usually for infoboxes)	Wikidata
{{Location map|{{{1}}} |width = |float = |border = |caption = |alt = |relief = |AlternativeMap= |overlay_image = |label = |label_size = |position = |background = |mark = |marksize = |link = |lat_deg = |lon_deg = }}	{{Location map|{{{1}}} |width = |float = |border = |caption = |alt = |relief = |AlternativeMap= |overlay_image = |label = |label_size = |position = |background = |mark = |marksize = |link = |lat_deg = |lat_min = |lat_sec = |lat_dir = |lon_deg = |lon_min = |lon_sec = |lon_dir = }}	{{Location map|{{{1}}} |width = |float = |border = |caption = |alt = |relief = |AlternativeMap= |overlay_image = |label = |label_size = |position = |background = |mark = |marksize = |coordinates= }}	{{Location map|{{{1}}} |width = |float = |border = |caption = |alt = |relief = |AlternativeMap= |overlay_image = |label = |label_size = |position = |background = |mark = |marksize = }}

Parameters

Parameters

Parameter kind	Parameter	Description
Map display	{{{1}}}	Required – use the name of the map as the first unnamed parameter; for example, specifying England will use the values for England in Module:Location map/data/England. See the examples below. Multiple maps can be shown by providing a list of map names separated by #. For multiple maps, the first is shown by default. A reader can select the others with radio buttons.
	width	Determines the width of the map in pixels, overriding any default values; do not include px. For example, use |width=300, not |width=300px.
	default_width	Determines the default width of the map in pixels, intended for use by templates, e.g. place infoboxes; the default value is 240. Do not include px. This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. For example, if |default_width=200 is given, a map of Thailand will be displayed with a width of 200×0.57=114 pixels (as specified in Module:Location map/data/Thailand).
	max_width	The maximum size of the map in pixels. Intended for use by templates, e.g. place infoboxes. Do not include px.
	float	Specifies the position of the map on the page; valid values are left, right, center and none. The default is right.
	border	Specifies the colour of the 1px map border; the default is lightgrey (see web colors). If set to none, no border will be generated. This parameter is seldom used. Special value: infobox.
	caption	The text of a caption to be displayed below the map; specifying a caption will cause the map to be displayed with a frame. If |caption= is defined but not assigned a value, the map will not be framed and no caption will be displayed. If |caption= is not defined, the map will not be framed and a default caption will be generated. The default caption is created from the |label= parameter (or the current page name if |label= not defined) and the |name= parameter from the map definition template. Multiple captions can be shown when separated by ## (that's two).
	alt	Alt text for map; used by screen readers. See WP:ALT.
	relief	Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as image1, which is usually a relief map; see the example at Location map+/relief. Other numerical values such as 2 or 3 will display image2 or image3, if those images are defined.
	AlternativeMap	Allows the use of an alternative map; the image must have the same edge coordinates as the location map template. See the example at Location map+/AlternativeMap.
	overlay_image	Allows an overlay to be superimposed on the map; this parameter is seldom used. See the example at Location map+/overlay.
Label and mark parameters	label	The text of the label to display next to the identifying mark; a wikilink can be used. You can enclose the label inside of {{nowrap}} if you want to make sure that it stays on a single line. The default (if not specified) is no label, just the marker.
	label_size	The font size to use for the label, given as a percentage of the normal font size (<100=smaller, >100=larger); the default size is 90. Do not include %. For example, use |label_size=80, not |label_size=80%. If set to 0, the label is only displayed when the user hovers over the mark.
	label_width	The width to use for the label, given as an em size; the default width is 6. Do not include em. For example, use |label_width=7, not |label_width=7em.
	position	The position of the label relative to the identifying mark; valid values are left, right, top,bottom and none. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image. When |position=none, any defined label will not be displayed with the mark, but it will be used to create the default caption.
	background	The background colour to use for the label; see Web colors. The default is no background colour, which shows the map image behind the label.
	mark	The name of an image file to display as the identifying mark; the default is Red pog.svg (File:Red pog.svg). See examples at Commons:Location markers and Commons:Category:Map icons.
	marksize	The size of the identifying mark in pixels; the default is 8. Do not include px. For example, use |marksize=10, not |marksize=10px.
	link	Specifies a wikilink which can be followed if the reader clicks on the identifying mark; do not include [[]] (double square brackets). For example, use |link=Yellowstone National Park, not |link=[[[:Template:Zwsp]][Yellowstone National Park]].
	coordinates	The coordinates in {{Coord}} format. Whilst not recommended, coordinates can also be entered in decimal degrees (e.g. 48.067°N 12.863°E); you shouldn't need to do this, though.
	lat_deg	The degrees of latitude; this value can be specified using decimal degrees, and when this format is used, minutes and seconds should not be specified.
	lat_min	The minutes of latitude.
	lat_sec	The seconds of latitude; not usually necessary.
	lat_dir	N for north (default value), or S for south of the Equator; other values will be disregarded. Not required if using signed decimal degrees, i.e. negative numbers for southern latitude.
	lon_deg	The degrees of longitude; this value can be specified using decimal degrees, and when this format is used, minutes and seconds should not be specified.
	lon_min	The minutes of longitude.
	lon_sec	The seconds of longitude; not usually necessary.
	lon_dir	E for east (default value), or W for west of the Prime Meridian; other values will be disregarded. Not required if using signed decimal degrees, i.e. negative numbers for western longitude.

Available maps

File:Template location map.svg

Location map templates as of 5 Nov 2014. To find the best location map template covering a given place, open the SVG file in a web browser and use arrow keys and zoom function. Hovering over a region shows its name and highlights it. Clicking it loads its page.

There are over 1,000 maps available. To find other maps:

• Special:PrefixIndex/Module:Location map/data/ – checked before a map template is searched for; new maps should be created here rather than creating new templates
• Template:Location map/List – some of the items listed here are redirects, and a few templates may not function as expected

• Template:Location map/List/sorted - a list sorted geographically, which may be more useful

• Category:Location map templates – templates sorted by category
• Special:WhatLinksHere/Template:Location map/Info – a search that might help
• Special:Prefixindex/Template:Location map – another search that might help

Creating new map definitions

See Creating a new map definition.

Examples

Default width and float, no label, default caption (decimal coordinates)

Note: when a label is not specified, the default caption is "Page name (Map name)", so if this example was viewed on a page named Pag, the default caption would be "Pag (Croatia)". Likewise, on a page named Pag (town), the default caption would be "Pag (town) (Croatia)".

{{Location map|Croatia
|alt     = Pag is on an island.
|lat_deg = 44.44
|lon_deg = 15.05
}}

Map with the default caption (degrees/minutes)

Note: when a label is specified, the default caption is "Label text (Map name)", seen as "Pag (Croatia)" in this example.

{{Location map|Croatia
|width = 200
|float = right
|alt = Pag is on an island.
|label = Pag
|position = right
|mark = Green pog.svg <!--green dot-->
|lat_deg = 44 |lat_min = 26 <!-- default: lat_dir = N -->
|lon_deg = 15 |lon_min = 3  <!-- default: lon_dir = E -->
}}

When |position=none, the label text is not displayed next to the mark, but is still used in the default caption and default alt text.

{{Location map|Croatia
|width = 200
|float = right
|label = Pag
|position = none
|mark = Green pog.svg <!--green dot-->
|lat_deg = 44 |lat_min = 26 <!-- default: lat_dir = N -->
|lon_deg = 15 |lon_min = 3  <!-- default: lon_dir = E -->
}}

Mark outside of map border, no caption

{{Location map|Croatia
|width    = 200
|float    = right
|caption  =
|alt      = Rimini in Italy (outside the map)
|lat_deg  = 44.05
|lon_deg  = 12.57 <!--outside maps left border at 13.1-->
|outside  = 1 <!--we're aware the point is outside the map, so suppress the warning category-->
|label    = Rimini
|position = right
}}

Caption, label_size, background, mark, marksize

{{Location map|Italy
|width      = 200
|float      = right
|caption    = Location of Rimini in Italy
|alt        = Map of Italy with mark showing location of Rimini
|label      = Rimini
|label_size = 130 <!--130% of normal size-->
|position   = bottom
|background = #ffaa00aa <!--with opacity-->
|mark       = Orange_pog.svg
|marksize   = 12 <!--size in pixels-->
|lat_deg    = 44.05
|lon_deg    = 12.57
}}

AlternativeMap parameter

{{Location map|Italy
|AlternativeMap = Italy relief location map.jpg
|width   = 200
|float   = right
|caption = Location of Rome in Italy
|alt     = Map of Italy with mark showing location of Rome
|label   = Rome
|lat_deg = 41.9
|lon_deg = 12.5
}}

Relief parameter

When |relief= has no value, the module defined image is shown. Numerical values 1 to 99 will show image1 to image99. Any other value will show image1.

The following example also demonstrates automatic positioning of label to the left due to the far right position of the mark.

{{Location map|Africa
|relief = yes
|caption = Location of [[Beyla]] in Africa
|label = Bandar Beyla
|label_width = 9
|lat = 9.5
|long = 50.8
}}

The second relief map from Module:Location map/data/Africa can be used by setting |relief=2

{{Location map|Africa
|relief = 2
|caption = Location of Beyla on a simulated [[land cover]] map of Africa 
|label = Bandar Beyla
|label_width = 9
|lat = 9.5
|long = 50.8
}}

User selection of multiple maps

{{Location map|UK Scotland#UK
|relief = 1
|width = 180
|float = right
|caption = Lockerbie in Scotland, UK
|alt = Lockerbie is in southern Scotland.
|label = Lockerbie
|mark = Blue_pog.svg
|marksize = 9
|lat_deg = 55 |lat_min = 07 |lat_sec = 16 |lat_dir = N
|lon_deg = 03 |lon_min = 21 |lon_sec = 19 |lon_dir = W
}}

Multiple selectable maps in floating box

Template such as Template:Infobox settlement display the selectable radio buttons underneath the location map. The following code utilizes Template:Stack to achieve a similar result.

{{stack begin}}
<div style="background:white; border:1px solid rgb(0, 0, 0); padding:2px; align:center; text-align:left; width:260; position:relative;">
{{Location map|Poland#Podlaskie Voivodeship#Europe#Baltic Sea#NATO
|relief        = Yes
|width         = 260
|default_width = 
|float         = 
|caption       = The [[Suwałki Gap]] is named after the city of [[Suwałki]] (marked by the blue dot).
|alt           = The city of Suwałki
|label         = Suwałki
|link          = Suwałki
|position      = 
|mark          = Blue_pog.svg
|marksize      = 6
|coordinates   = {{coord|54|05|56|N|22|55|43|E|region:PL_type:city|display=inline,title}}
|border        = infobox
|background    = 
}}
</div>
{{stack end}}

Map that crosses 180° meridian

Module:Location map/data/Russia Chukotka Autonomous Okrug is an example of a map that crosses the 180th meridian. To the west of 180° in the Eastern Hemisphere is Pevek, at 170°17′E longitude. To the east of 180° in the Western Hemisphere is Uelen, at 169°48′W longitude.

{{Location map
| Russia Chukotka Autonomous Okrug
| float       = right
| width       = 250
| caption     = [[Chukotka Autonomous Okrug]]
| label       = Pevek
| position    = bottom
| background  = lightgreen
| mark        = Locator_Dot.png
| marksize    = 7
| coordinates = {{coord|69|42|N|170|17|E}}
}}

{{Location map
| Russia Chukotka Autonomous Okrug
| float       = right
| width       = 250
| caption     = [[Chukotka Autonomous Okrug]]
| label       = Uelen
| position    = bottom
| background  = lightgreen
| mark        = Locator_Dot.png
| marksize    = 7
| coordinates = {{coord|66|09|N|169|48|W}}
}}

Template data

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:Location map in articles based on its TemplateData. TemplateData for Location map This template places a location mark on a map. Template parameters Parameter Description Type Status Map name(s) 1 The name of the map to be used; multiple maps can be provided as a list separated by "#". String required Map width width Determines the width of the map in pixels, overriding any default values; do not include "px". For example, use "width=300", not "width=300px". Number optional Default width default_width Determines the default width of the map in pixels, intended for use by templates, e.g. place infoboxes; the default value is 240. Do not include "px". This value will be multiplied by the 'defaultscale' parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. Number optional Position float Specifies the position of the map on the page; valid values are "left", "right", "center" and "none". The default is "right". Suggested values left right center none Default right String optional Frame style border Specifies the colour of the map frame when the parameter caption is used. If set to "none", no border will be generated. Suggested values none infobox LightGray String optional Map caption caption The text of a caption to be displayed below the map; if caption is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If caption is not defined, the map will not be framed and a default caption will be generated. String optional Alt text alt Alt text for map; used by screen readers. String optional Alternative map from template relief Any non-blank value ("1", "yes", etc.) will cause the template to display the map specified in the map definition template as "image1", which is usually a relief map. If more than one relief map is defined, "2" will display "image2", and so on. String optional Alternative map not from template AlternativeMap Allows the use of an alternative map; the image must have the same edge coordinates as the location map template. String optional Overlay image overlay_image Allows an overlay to be superimposed on the map; this parameter is seldom used. String optional Marker label label The text of the label to display next to the identifying mark; a wikilink can be used. String optional Label size label_size The font size to use for the label, given as a percentage of the normal font size; do not include "%". Number optional Label width label_width The width to use for the label, given as an em size; do not include "em". Number optional Label position position The position of the label relative to the identifying mark; valid values are "left", "right", "top", "bottom" and "none". This defaults to either "left" or "right", depending on the coordinates of the marker and its position relative to the right border of the map image. When "position=none", any defined label will not be displayed with the mark, but it will be used to create the default caption. String optional Label background background The background colour to use for the label. String optional Marker image mark The name of an image file to display as the identifying mark. String optional Marker size marksize The size of the identifying mark in pixels; do not include "px". Number optional Marker link link Specifies a wikilink which can be followed if the reader clicks on the identifying mark. String optional Coordinates coordinates Coordinates, usually in {{Coord}} format; however, they can also be typed out in decimal degrees (with no spaces between "°" and "N"/"S"/"E"/"W"). Example {{Coord|48.067|12.863}} String optional Latitude degrees lat_deg The degrees of latitude; this value can be specified using decimal degrees, and when this format is used, minutes and seconds should not be specified. Number required Latitude minutes lat_min The minutes of latitude. Number optional Latitude seconds lat_sec The seconds of latitude. Number optional Latitude direction lat_dir "N" for north or "S" for south of the Equator; not required if using signed decimal degrees. String optional Longitude degrees lon_deg The degrees of longitude; this value can be specified using decimal degrees, and when this format is used, minutes and seconds should not be specified. Number required Longitude minutes lon_min The minutes of longitude. Number optional Longitude seconds lon_sec The seconds of longitude. Number optional Longitude direction lon_dir "E" for east or "W" for west of the Prime Meridian; not required if using signed decimal degrees. String optional

See also

• Wikipedia:Maps for Wikipedia, a list of mapping tools available on Wikipedia
• Template:Location map/Info

For similar examples, see the documentation at Template:Location map+, as well as:

• Template:Location map+/relief, an example using the |relief= parameter
• Template:Location map+/AlternativeMap, an example using the |AlternativeMap= parameter
• Template:Location map+/overlay, an example using the |overlay_image= parameter

Location map templates

• Template:Location map many, to display up to nine (9) markers and labels
• Template:Location map+, to display unlimited number of markers and labels

Other templates

• Template:Annotated image, allows text notes to overlap image, allows cropping
• Template:Overlay, places up to thirty (30) marker images of various choose-able kinds over a base image with optional grid and legend
• Template:Superimpose, supports simple layer superimposition
• Template:Superimpose2, to place up to fifty (50) image layers over one another

Infoboxes incorporating Location map – any country or region Template:Location map/doc/See also infobox templates

Infoboxes incorporating Location map – specific countries or regions Template:Hidden

The above documentation is transcluded from Template:Location map/doc. (edit | history)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.